Henry Riflescope Mounts

$69.95

SPECIFICATION

Henry Riflescope Mounts are available for the following models H001, H002, H003, H004, H005 and H006/H012. Instructions on installation of the scope mount is provided in the packaging. All Henry Scope Mounts accept Weaver style detachable 1″ top mount rings (rings not included).

Description

Henry Riflescope Mounts are available for the following models H001, H002, H003, H004, H005 and H006/H012. Instructions on installation of the scope mount is provided in the packaging. All Henry Scope Mounts accept Weaver style detachable 1″ top mount rings (rings not included).

Note to Big Boy Owners (H006/H012 Series in .38/.357, .44m, .45lc, .41m, .327/.32)

Previous production or 1st gen Brass Big Boy guns were drilled and tapped on the barrel under the rear sight, they were NOT drilled/tapped on the receiver. You will need to use BB-CSM for 1st gen H006 Brass Big Boy series. In 2011 we began shipping 2nd generation Brass Big Boy rifles which feature receivers that are drilled and tapped for the scope mount. For 2nd Gen Brass Big Boys you can use either the BB-RSM (weaver-style) or BB-RSMP (picatinny-style) rails. Ring/base combo also available for 2nd gen, linked below. 2nd generation Brass Big Boys start with the following serial numbers:

  • H006 = BB0047222
  • H006M = BB0015530M
  • H006C = BB0021188C

ALL H012 Series guns are 2nd Generation.

 

Note to Golden Boy Owners (H004 Series in .22s/l/r, .22m, .17hmr)

H004 Series guns with a Brooklyn, NY rollmark on the barrel were not drilled and tapped for a scope mount. If your gun is NOT made in Brooklyn, NY you can use the GB-CSM or GB-CSMP mounts for H004 series guns. The drilled and tapped holes are located under the rear sight. Note to Henry Classic, US Survival Rifle and Henry Pump owners (H001, H002, H003 Series)

The receivers on the H001, H002, and H003 series have a 3/8th inch dovetail running along the top of the receiver. You can use 3/8th inch rimfire rings which attach directly to the dovetail. You can use the picatinny rail HLPA001 listed on this page if you wish to mount a red dot optic. If you are putting the rail or rings on the US Survival rifle, they will have to be removed before disassembling back into the stock.

 

Picatinny rails and ring/base sets are available as separate listings for the models below:

  • H009 Series (Lever Action .30-30)
  • H010 Series (Lever Action .45-70)
  • H014 Series (Long Ranger .223, .243, .308, and 6.5 creed)
  • H015 Series (Single Shot Rifles or Single Shot Shotguns with drilled/tapped barrels)
  • H018 Series (Lever Action .410 Shotguns)
  • H024 Series (Brass Side-gate .30-30, .38-55, .35, .45-70)

Please note that the following series listed below will also take a Weaver 63B: H009, H010, H018, H024 Series rifles.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.